Diy Basement Remodel for Basement Exposed-Channel

Jun 17th

Diy basement remodel – For remodeling basement exposed-channel, you can attach the channels in a box running along the ceiling or wall. This alternative, non-vents, are good if you have the materials and extra time. It will take up more space, leaving less space in some cases, and it can be hard to do. The enclosed area must be built by a 2-by-4-inch board frame and gypsum and run the entire length of the channels. Benefits include the ability to install lights along this box. And the reduction of noise coming from the air ducts. The enclosed area must meet building codes for closed channel system.

Wall Diy Basement Remodel
Wall Diy Basement Remodel

Another option of diy basement remodel for Basement exposed-channel is to hide the channel either by enclosing the roof, or by building the roof around it. If you choose to enclose the channel by installing a drop ceiling over it, you may encounter problems with the ventilation system in what is now a small, enclosed area. This is recommended only if the system does not ventilate the room. Hides the channel is a better option. It allows the system to continue ventilation in the basement and cause fewer problems, mechanically on the road.

12 Photos Gallery of: Diy Basement Remodel for Basement Exposed-Channel

Image of: Wall Diy Basement Remodel
Image of: Small Diy Basement Remodel
Image of: New Diy Basement Remodel
Image of: Large Diy Basement Remodel
Image of: Kitchen Diy Basement Remodel
Image of: Home Theater Diy Basement Remodel
Image of: Finishing Diy Basement Remodel
Image of: Family Romm Diy Basement Remodel
Image of: Diy Basement Remodel Ideas
Image of: Diy Basement RemodelDesign
Image of: Creative Diy Basement Remodel
Image of: Ceiling Diy Basement Remodel
 

You can hide channels behind natural wooden beams, which will also lend character to your cellar. For diy basement remodel for Basement exposed-channel, you can also install a trellis, or framed beamed covered with plaster, to prevent the view of the canal. This beam must be placed where it can obstruct the view and does not block ventilation. Another easy option is to paint the channels of two-layer or single color that matches the color of the roof.